Features
Low Ripple & Noise
Output over voltage protection
Short circuit protection on all outputs
Resettable power shut down
INTERNAL 4 cm fan
100% burn-in under high ambient temperature(50˚C)
Vacuum-impregnated transformer
MTBF : 100K hours at 25˚C
100% Hi-pot tested
Line input fuse protection
Model Name
- FSP100-50LG
Wattage
- 100W
Dimension
- 150mm (L) x 81.5 mm (W) x 40.5mm (H)
Product Highlight
- Effciency Level : Non-80 +
- Altitude : 2000M
- PMBus : For standard, advanced server, NAS and industrial power system.
General Specification
- Efficiency : 68%
- Voltage Regulation : +3.3V, +12V, +5V, +5SB: ±5% , -12V : ±10%
Input Electrical Specification
- Input Frequency : 47 ~ 63Hz
- Input Current : 115V@ 3.0 Amps-rms maximum
230V@ 1.5 Amps-rms maximum
Output Specification
- Hold-up time : 115V/60Hz 17mSec. Minimum@100% Load
230V/50Hz 17mSec. Minimum@100% Load
- Output Voltage Regulation : +3.3Vdc output = +3.7 Vdc minimum, + 4.5Vdc maximum
+5Vdc output = +5.7 Vdc minimum, + 6.5Vdc maximum
+ 12Vdc output : +13.3 Vdc minimum, + 15.6Vdc maximum
- Ripple & Noise : 115V-rms/230V-rms 5V 20ms Maximum
115V-rms/230V-rms 12V 20ms Maximum
- Over current protection : 3.3V = 50mV p-p
5V = 50mV p-p
12V1 = 120mV p-p
-12V = 120mV p-p
5Vsb = 50mV p-p
Environmental Requirement
- Temperature Range
Operating : 0 to + 50℃
Storage : -20 to + 80℃
- Humidity
Operating : 85% to % RH, Non-condensing
Storage : 95% to % RH, Non-condensing
- MBTF : The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, maximum-output load, and nomimal AC inout voltage
Safety
- CE, FCC, TUV, UL/cUL
Notes
5V, 3.3V, 12V, -12V Will have the regulation to 10% when all load take off.
The +3.3V and +5V total output shall not exceed 50 watts.
The +3.3V, +5V and +12V total output shall not exceed 86.4 watts.
The total output shall not exceed 100 watts.
Comentários